Add New Device

No devices found

Device Type:

Select the type of LED controller

Device Name:

URL:

IP address or hostname of the device (e.g. http://192.168.1.100)

Serial Port:

Select the COM port of the Adalight device

Zones:

Select which LED zones to control (leave all unchecked for all zones)

Zone mode:

Combined treats all zones as one continuous LED strip. Separate renders each zone independently with the full effect.

Combined strip Independent zones

LED Count:

Number of LEDs on the strip (must match your Arduino sketch)

Baud Rate:

Serial communication speed. Higher = more FPS but requires matching Arduino sketch.

LED Type:

RGB (3 channels) or RGBW (4 channels with dedicated white)

Send Latency (ms):

Simulated network/serial delay per frame in milliseconds

DMX Protocol:

Art-Net uses UDP port 6454, sACN (E1.31) uses UDP port 5568

Start Universe:

First DMX universe (0-32767). Multiple universes are used automatically for >170 LEDs.

Start Channel:

First DMX channel within the universe (1-512)

Peer MAC:

MAC address of the remote ESP32 receiver (e.g. AA:BB:CC:DD:EE:FF)

WiFi Channel:

WiFi channel (1-14). Must match the receiver's channel.

Bridge Username:

Hue bridge application key from pairing

Client Key:

Entertainment API client key (hex string from pairing)

Entertainment Group:

Entertainment configuration ID from your Hue bridge

SPI Speed (Hz):

SPI clock speed. 800000 Hz for WS2812, 2400000 Hz for APA102.

LED Chipset:

Type of addressable LED strip connected to the GPIO/SPI pin

Peripheral Type:

Which Razer peripheral to control

Peripheral Type:

Which SteelSeries peripheral to control

Strip Processing Template:

Default processing template applied to all color strip outputs on this device