- Add protocol field (ddp/http) to storage, API schemas, routes, processor
- WledTargetProcessor passes protocol to create_led_client(use_ddp=...)
- Target editor: protocol dropdown + keepalive in collapsible Specific Settings
- FPS, brightness threshold, adaptive FPS moved to main form area
- Hide Specific Settings section for serial devices (protocol is WLED-only)
- Card badge: show DDP/HTTP for WLED devices, Serial for serial devices
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
DDP uses fire-and-forget UDP, so when a WiFi device becomes overwhelmed
by sustained traffic, sends appear successful while the device is
actually unreachable. This adds:
- HTTP liveness probe (GET /json/info, 2s timeout) every 10s during
streaming, exposed as device_streaming_reachable in target state
- Adaptive FPS (opt-in): exponential backoff when device is unreachable,
gradual recovery when it stabilizes — finds sustainable send rate
- Honest health checks: removed the lie that forced device_online=true
during streaming; now runs actual health checks regardless
- Target editor toggle, FPS display shows effective rate when throttled,
health dot reflects streaming reachability, red highlight when
unreachable
- Auto-backup scheduling support in settings modal
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New per-target property: when effective output brightness
(max pixel value × device/source brightness) falls below
the threshold, LEDs turn off completely. Useful for cutting
dim flicker in audio-reactive and ambient setups.
Threshold slider (0–254) in target editor, badge on card,
hot-swap to running processors, persisted in storage.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add auto_start boolean field to PictureTarget model (persisted per-target)
- Wire auto_start through API schemas, routes, and store
- Auto-start targets on server boot in main.py lifespan
- Add star toggle button on target cards (next to delete button)
- Add auto-start section on dashboard between performance and profiles
- Remove auto-start section from profiles tab
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Introduces a new Value Source entity that produces a scalar float (0.0-1.0)
for dynamic brightness modulation. Three subtypes: Static (constant),
Animated (sine/triangle/square/sawtooth waveform), and Audio-reactive
(RMS/peak/beat from mono audio source). Value sources can be optionally
attached to LED targets to control brightness each frame.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Segments are redundant now that the "mapped" CSS type handles spatial
multiplexing internally. Each target now references one color_strip_source_id
instead of an array of segments with start/end/reverse ranges.
Backward compat: existing targets with old segments format are migrated
on load by extracting the first segment's CSS source ID.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Each target now has a segments list where each segment maps a color strip
source to a pixel range (start/end) on the device with optional reverse.
This enables composing multiple visualizations on a single LED strip.
Old targets auto-migrate from the single source format on load.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
LED skip: set first N and last M LEDs to black on a target. Color sources
(static, gradient, effect, color cycle) render across only the active
(non-skipped) LEDs. Processor pads with blacks before sending to device.
Rename standby_interval → keepalive_interval across all Python, API
schemas, and JS. from_dict falls back to old key for existing configs.
Remove legacy migration functions (_migrate_devices_to_targets,
_migrate_targets_to_color_strips) and legacy fields from target model.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Replace animation Enable checkbox with None option in effect selector;
show effect description tooltip; disable speed slider when None selected
- Allow target FPS range 1-90 (was 10-90) across UI and backend validation
- Scope serial COM connections to target lifetime (no idle caching);
use temporary connections for power-off/test mode
- Fix serial black frame on stop: flush after write, delay after task
cancel to prevent race with in-flight thread pool write
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
FPS is a consumption property (how fast to send to a device), not a
production property. Two targets sharing the same source may need
different FPS. This moves the fps field from PictureColorStripSource
to WledPictureTarget across the full stack.
The capture stream now auto-adjusts its rate to max(all connected
target FPS values) via ColorStripStreamManager tracking per-consumer
FPS. UI updates: FPS slider in target editor, FPS badge on target
cards, LED count repositioned in CSS editor, consistent speed icons.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Extracts color processing and calibration out of WledPictureTarget into a
new PictureColorStripSource entity, enabling multiple LED targets to share
one capture/processing pipeline.
New entities & processing:
- storage/color_strip_source.py: ColorStripSource + PictureColorStripSource models
- storage/color_strip_store.py: JSON-backed CRUD store (prefix css_)
- core/processing/color_strip_stream.py: ColorStripStream ABC + PictureColorStripStream (runs border-extract → map → smooth → brightness/sat/gamma in background thread)
- core/processing/color_strip_stream_manager.py: ref-counted shared stream manager
Modified storage/processing:
- WledPictureTarget simplified to device_id + color_strip_source_id + standby_interval + state_check_interval
- Device model: calibration field removed
- WledTargetProcessor: acquires ColorStripStream from manager instead of running its own pipeline
- ProcessorManager: wires ColorStripStreamManager into TargetContext
API layer:
- New routes: GET/POST/PUT/DELETE /api/v1/color-strip-sources, PUT calibration/test
- Removed calibration endpoints from /devices
- Updated /picture-targets CRUD for new target structure
Frontend:
- New color-strips.js module with CSS editor modal and card rendering
- Calibration modal extended with CSS mode (css-id hidden field + device picker)
- targets.js: Color Strip Sources section added to LED tab; target editor/card updated
- app.js: imports and window globals for CSS + showCSSCalibration
- en.json / ru.json: color_strip.* and targets.section.color_strips keys added
Data migration runs at startup: existing WledPictureTargets are converted to
reference a new PictureColorStripSource created from their old settings.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ProcessorManager: replace all isinstance checks with property-based
dispatch via base TargetProcessor (device_id, led_client,
get_display_index, update_device, update_calibration).
Remove gamma/saturation from ProcessingSettings, ColorCorrection
schema, serialization, and migration — these were never used in the
processing pipeline and are handled by postprocessing template filters.
Delete dead apply_color_correction() function.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Replace isinstance checks with polymorphic methods on PictureTarget
hierarchy: register_with_manager, sync_with_manager, update_fields,
and has_picture_source property.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Introduce abstract LEDClient base class with factory pattern so new
LED controller types can plug in alongside WLED. ProcessorManager is
now fully type-agnostic — all device-specific logic (health checks,
state snapshot/restore, fast send) lives behind the LEDClient interface.
- New led_client.py: LEDClient ABC, DeviceHealth, factory functions
- WLEDClient inherits LEDClient, encapsulates WLED health checks and state management
- device_type field on Device storage model (defaults to "wled")
- Rename target_type "wled" → "led" with backward-compat migration
- Frontend: "WLED" tab → "LED", device type badge, type selector in
add-device modal, device type shown in target device dropdown
- All wled_* API fields renamed to device_* for generic naming
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Skip redundant processing/DDP sends when screen is static using object
identity comparison. Add configurable standby interval to periodically
resend last frame keeping WLED in live mode. Track frames skipped,
keepalive count, and current FPS (rolling 1-second send count). Always
use DDP regardless of LED count. Compact metrics grid with label-value
rows and remove Skipped from UI display.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Introduce a new "key_colors" target type alongside WLED targets, enabling
real-time color extraction from configurable screen rectangles with
average/median/dominant modes, temporal smoothing, and WebSocket streaming.
- Split WledPictureTarget into its own module, add KeyColorsPictureTarget
- Add KC target lifecycle to ProcessorManager (register, start/stop, processing loop)
- Extend API routes and schemas for KC targets (CRUD, settings, state, metrics, colors)
- Add WebSocket endpoint for real-time color updates with auth
- Add KC sub-tab in Targets UI with editor modal and live color swatches
- Add EN and RU translations for all key colors strings
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
alexei.dolgolyov